Wood Stain, Wood Finishes, Deck Stain, Deck Finishes, Vinyl Cleaner and More
customer support 1.800.321.3444
 
Step-By-Step Project Guide
Exterior Wood Stripping

 
 
Wood and Deck Stripper Project Guide for Wood Stripping  
Stripping a Finish from Exterior Wood


This project guide includes:

1. You Will Need - Items to gather for your wood deck or exterior wood stripping project
2. Before Application
- Good practices and preparation
3. Application - Specific steps for completing your wood deck or exterior wood stripping project
Safety Precautions - Product warning and important safety information

 
Wood and Deck Stripper Project Guide for Wood Stripping     

 

1. YOU WILL NEED -

  • Flood® StainStrip®*

  • Broom or leaf-blower

  • Plastic drop cloths

  • Rags

  • Large bucket (5 gallon capacity or equivalent)

  • 5 gallon plastic roller grid

  • Plastic garden (pump up)sprayer (not larger than 2 gallon capacity), brush or long-handled roller (roller 1" - 1-1/2" synthetic nap cover)

  • Long-handled, short, stiff bristle brush (not a wire brush)

  • Garden hose (sufficient length) with spray nozzle, or pressure washer** with attachment tips (can be rented at most home improvement or hardware stores)

  • Gasoline for the pressure washer (if being used)

  • Chemical resistant rubber gloves

  • Safety goggles

  • Protective clothing


PLEASE NOTE:
Although this exterior wood stripping project guide uses an exterior wood deck as its example, the same process may be used to strip other exterior wood surfaces, such as wood siding, wood fences and outdoor wood furniture.

----------------------------------------------------------

Flood StainStrip is a finish remover for exterior wood surfaces.
 
How to determine whether you need to use Flood StainStrip:
 
Does your deck or wood surface have a clear, natural, semi-transparent or solid color finish that needs to be removed? Use StainStrip to remove all exterior finishes, even 100% acrylics.

Here's a simple test to help you check whether your exterior wood has an existing clear or natural finish on it: Sprinkle a drop or so of water onto your deck surface. If it absorbs into the wood in just a few second's time it probably is not coated. If it beads for longer than that before drying, your deck is likely to have an existing finish applied.

Still not sure whether StainStrip is the right product for your wood deck or exterior wood stripping project? Call our customer service representatives to assist you in making your choice. Contact them via the web site or call 1-800-321-3444.

----------------------------------------------------------

**When using a pressure washer for your deck or wood stripping project, refer to the pressure washer manufacturer's instructions for handling and precautionary information. Improper use could result in serious injury and may severely damage the wood.

 

< Back     ---     Next Step >

Download Complete Deck and Exterior Wood Stripping Project Guide PDF

 
Before and after Dekswood application