One Step Teak Cleaner & Brightener

Deckworks™ is a one-step teak cleaner and brightener that removes ground-in and surface dirt, restoring a bright, vibrant look to weather-beaten teak. Deckworks contains no bleach and won't harm plants or shrubbery.

Where To Use
• Use on teak to clean and brighten
• Use on fiberglass to clean and de-oxidize

Peparation
• Deckworks is concentrated – 1 gallon will make 2.
• Shake well before using.
• Mix one part Deckworks to one part water.
• Do not mix with chlorine bleach or other household cleaning products. Doing so can result in release of highly toxic gases.
• Mix using only plastic containers in well-ventilated areas.

Application
• When treating teak (and maghogany), rinse the surface with fresh water.
• Work Deckworks into wood with a stiff nylon or natural bristle scrub brush (do not use wire brush).
• Allow solution to stand for 30 minutes.
• Rinse thoroughly using the highest pressure from a fresh water source.
• Allow teak to thoroughly dry 24 hours before applying Teakworks™.
• When treating fiberglass (deck and topside surfaces), rinse the surface with fresh water.
• Apply Deckworks with a soft brush (do not use a wire brush).
• Allow solution to stand for 5 minutes.
• Rinse thoroughly using the highest pressure from a tap water source.
• Allow surface to dry before applying Glasworks™.

Coverage
• When mixing with 1 quart of water, one quart of Deckworks will clean up to 200 sq. ft.

Clean Up
• Cleans up with fresh water.
• Keep from freezing when storing.


LIMITED WARRANTY - Deckworks™

Product Safety Information