Restores Color to Faded Fiberglass

Glasworks™ is a deep penetrating oil that reaches down into fiberglass and restores the orginal color then dries to a tough, flexible finish. Glasworks is long-lasting and penetrates deep into fiberglass. Glasworks eliminates the need for expensive waxes and polishes that sit on the surfaces and dry out quickly.

Where to Use
• Use on fiberglass

Preparation
• Rinse the surface with fresh water.
• Remove dirt and heavy oxidation by scrubbing with a 50/50 solution of Deckworks™ while surface is wet.
• Let stand for 5 minutes.
• Rinse surface with fresh water thoroughly and allow surface to completely dry.

Application
• Choose an area that can be managed within 5 minutes. Excess Glasworks that dries on the surface may be removed with any paint remover made specifically for fiberglass.
• Do not apply Glasworks in direct sunlight.
• Saturate a SOFT cloth with Glasworks and wipe it on.
• With a soft cloth, wipe off excess within 5 minutes.
• Gently polish with a lint-free cloth to a new sheen.

Coverage
• One quart of Glasworks will finish up to 200 sq. ft.

Clean Up
• Use mineral spirits while Glasworks is still wet.
• Dispose of empty cans and saturated rags according to local regulations.
• Seal and store Glasworks in either a metal or glass container away from heat, flame and direct sunlight.


LIMITED WARRANTY - Glasworks™

Product Safety Information