Deep Penetrating, Long-Lasting Teak Finish

Teakworks™ is a deep penetrating non-oil based treatment that bonds to the wood providing a flexible, long-lasting finish. Teakworks is long-lasting because it saturates, seals and stabilizes wood to prevent cracking and contains ultraviolet absorbing pigments which resist the damaging effects of the sun. No need for fiberglass-safe paint removers if Teakworks gets on your surrounding fiberglass. Teakworks is fast, easy and safe because it is not solven-based and cleans up with soap and water.

Where To Use
• For use on teak surfaces.

Preparation
• Rinse the surface with fresh water.
• Remove surface and ground-in dirt with a 50/50 solution of Deckworks™.
• Work Deckworks into the surface with a stiff nylon or bristle brush (do not use a wire brush).
• Let stand for 30 minutes.
• Rinse surface thoroughly and allow it to completely dry.

Application
• Apply Teakworks with a soft brush until the wood no longer absorbs and the surface is slightly wet.
• Brush out excess with a clean brush after 30 minutes.
• Wait 30 minutes between coats of Teakworks. For best results use a minimum of three coats.
• Do not apply Teakworks in direct sunlight.

Coverage
• One quart of Teakworks will finish up to 100 sq. ft.

Clean Up
• Use soap and water while Teakworks is still wet.


LIMITED WARRANTY - Teakworks™

Product Safety Information