Enhances penetration and adhesion of oil-based paints and primers

Make interior painting projects flow more smoothly by using Penetrol® Oil Paint Conditioner with oil or alkyd paints. Penetrol reduces brush marks and leveling problems with the paint, and reduces fatigue and frustration with painting projects.

Where To Use
• Add to oil or alkyd paints to condition it to flow more smoothly while improving the penetration and adhesion of the paint.
• Improves leveling so you can expect a smoother coat that’s easier to apply.

Application
 • Stir and mix paint thoroughly and apply. When paint “pulls” or “sets” too fast, add Penetrol until the paint spreads smoothly and easily.
• Let the brush, roller or spray be the guide. Add enough Penetrol to make the paint work smoothly, giving sufficient “wet edge” time.
• Start with about a 10% addition of Penetrol.
• If paint is very thick, or weather hot or cold, 20-30% more Penetrol may be required. (For example, one quart of Penetrol per gallon of paint).
• After paint is used for a while, more Penetrol may be needed.
• NOTE: Addition of Penetrol may raise coating VOC. Please check with local and applicable VOC regulations before using Penetrol.
• The amount of Penetrol needed for easy application of flat, semi-gloss and gloss paints does not change their appearance.

Dry Time
• The majority of oil-based paints when applied at room temperature will be dry (set-to-touch) within 8 to 24 hours.

Clean Up
• Clean up tools with mineral spirits.
• Danger! Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool or waste in a sealed, water-filled metal container.


LIMITED WARRANTY - Penetrol® Oil Paint Conditioner

Product Safety Information


NEW 2008 MSDS SHEETS:

2008 MSDS US

2008 MSDS CANADA

2008 MSDS CANADA - FRENCH